HU Mod Pack troubleshooting

ita · Posted: Fri Nov 06, 2009 2:51 am Post subject: HU Mod Pack troubleshooting

Post here all your questions / issues about the mod pack.
_________________
HU Corner - The Hunter Profile - YouTube Channel

FLAGH Maj Master Mod Specialist

ShenziSixaxis · Member Joined: 02 Nov 2009 Posts: 15

Okay, here's a question: Is it normal for the game, once the mod is installed, to start up with a transparent backround (black and gray squares), have some text instead of logos when starting, start in windowed when settings are set in fullscreen, and have the text for the menus in the game disappear but still be able to see what it takes you to in some little text at the bottom when you have your cursor over one of the menus?

Confused

ita · Posted: Sat Nov 07, 2009 1:16 am Post subject:

No, it isn't.
But it is normal if you modded it yourself (or the mod pack) and left a " opened.
_________________
HU Corner - The Hunter Profile - YouTube Channel

FLAGH Maj Master Mod Specialist

ShenziSixaxis · Member Joined: 02 Nov 2009 Posts: 15

No, followed installation instructions, but I did read about installing a mod with a 'fresh .scs' file. How could I do that?

ita · Posted: Sat Nov 07, 2009 3:30 am Post subject:

i always recommend that, but if you didn't do anything else to the files then check your permissions rights to the files (user account options) and check if winrar is replacing all files correctly.
_________________
HU Corner - The Hunter Profile - YouTube Channel

FLAGH Maj Master Mod Specialist

ShenziSixaxis · Member Joined: 02 Nov 2009 Posts: 15

I believe it is, and I allowed the base.scs file to be placed into my Programs folder (Vista loves to freak out), so I don't think anything's really wrong with it...

I'll play around and see what I can do.

EDIT: FFFFFFF; that didn't work at all.
Could I perhaps download a base.scs file that is already modded and ready to use?

ita · Posted: Sat Nov 07, 2009 3:46 am Post subject:

if your getting what you described and the game isn't crashing then it's in the definitions files (you must be also getting "game_name" as the window title lol - and in your documents folder you will have a "game_name" folder too so you can deleted it). try an alternative install method.
btw, check the prism3d.log (documents\hunting unlimited X folder) file and see if you're getting any error there.
_________________
HU Corner - The Hunter Profile - YouTube Channel

FLAGH Maj Master Mod Specialist

ShenziSixaxis · Member Joined: 02 Nov 2009 Posts: 15

Yeah, "game_name". XD

I'm seeing a lot of "18:43:31 : [zipfs] Unsupported compression method used: 8 for record #2823 - challenge/bt_dnortje.def, from file 'base.scs'." in that file.

Could the problem be that I'm copying and pasting the mod files into the base.scs file instead of dragging and dropping? *doesn't see any reason for it*

EDIT: FFFFFFFFF. I never saw "Use store as the compression method and accept to replace files. " I don't think I'm doing that. Lemme try again.

ita · Posted: Sat Nov 07, 2009 3:58 am Post subject:

...
if your using winrar then doing that way, winrar will "mix up" the file compression. you must use no compression (compression method must be set to store).
_________________
HU Corner - The Hunter Profile - YouTube Channel

FLAGH Maj Master Mod Specialist

ShenziSixaxis · Member Joined: 02 Nov 2009 Posts: 15

I set it to store and dragged and dropped the files and I got it to work. xD Sorry 'bout the trouble.

ita · Posted: Sat Nov 07, 2009 4:07 am Post subject:

lol. no prob Smile

.
good hunts! Wink

_________________
HU Corner - The Hunter Profile - YouTube Channel

FLAGH Maj Master Mod Specialist

Lone Wolf · Posted: Sat Nov 07, 2009 4:35 am Post subject:

Why SCS decided to use no compression is beyond me. Rolling Eyes

Most other games will allow normal compression. At least the ones I've played with. Wink

LW

Ka-ching · Member Joined: 18 Nov 2009 Posts: 9 Location: Ohio

Ok I have a problem, I don't know if it did this without your mod or not but here's what I did, I re-installed HU 2010 then I downloaded and installed your mod(2.03), everything was working fine as far as I could see, then in the "level 11's" missions, stuff started to act wierd...for one, there was a mission where it said you had to shoot wild boars, but as soon as you were in the game 2 mountian lions charged you and from behind also 3 moose....no boars?? Another one was where you had to out run a group of bears then follow some skulls...and then when I got to the place it said I should now see a trophy elk...here's the wierd thing...I could hear the elk running around but I couldn't see it? Also you could see where he was going as tracks appeared and you could hear him, he was just running in circles around you?? *"The Invisible Elk! Surprised

"* Some other missions were acting a bit different too? Is it the mod? Confused

_________________
I don't have a signiture :p

Arnoldwleedy · Member Joined: 10 Mar 2008 Posts: 463

Invisible animals are the norm here..they eventually show up.Also..the missions sound familiar to me..but don't think ya got it figured out till ya do..lol Laughing

Truly..give it a chance..it sounds like it should be..I use vista too.We will try to help where we are able..but there is all kinds of help prewritten..these moderators are good..they can get ya fixed if they understand your problem clearly..good luck to you either way neighbor Wink

_________________
00

scatstwo · Member Joined: 28 Aug 2007 Posts: 436 Location: florida

If it's in tier 11, that must be One pig deserves another. In that Warden series (there's 3 or 4 missions) most of the animals are set for attack. So you have to learn the trick of escape because you don't always have a tag for the attacking animal. So just be careful and patient and you'll figure it out. Hope you enjoy those.
_________________
Scats
The only thing that beats an Ace is the Joker

	Hunting Tournaments Forum Index -> Technical Issues	All times are GMT + 1 Hour Goto page 1, 2 Next
Page 1 of 2